Here are some switch settings from a fellow Clock Chipper for the NewerTech MaxPowr G4 ZIF cards. This was compiled based on testing and info on jumper settings for Beige and B&W G3's.
S is for switch set to ON.
CPU (Bus Speed) |
Clock |
Multiplier |
1 |
2 |
3 |
4 |
| Beige G3 (66 MHz) | 466 MHz | 7x | S | |||
| Beige G3 (66 MHz) | 433 MHz | 6.5x | S | S | ||
| B&W G3 (100 MHz) | 450 MHz | 4.5x | S | S | S |
I have one report that the 7x configuration was too fast for his Beige G3/233 giving a system bus error, but it was fine with the 6.5x configuration (433 MHz).